Author Archives: admin

RunnTech Self-centering 2 axis ±10V Proportional Joystick with Center Tap Potentiometer

Product configuration: RT100-T-3-V1(10K)-02(89)-HD7-BT1R-M2

• RT100: RunnTech 100 series industry joystick controller;
• T: mechanical spring self-return (self-centering);
• 3: dual axis, 360° free movement;
• V1: input DC 24V, output: -10V…0…+10V;
• 10K: 10 kOhm conductive-plastic potentiometer;
• 02: 2 normally open contacts in each axis;
• 89: contacts @ -32° to -3° or +3° to +32°;
• HD7-BT1R: HD7 grip with 1 red self-resetting pushbutton;
• M2: mounting dimension 85x85mm, central hole: 63mm.

RunnTech Multi-axis Self-centering Joystick Controller for Crane, Hoist and Winches

Product configuration:RT300-TS-2-L-3(5)-HD39-M5

• RT300: RunnTech RT300 series crane joystick (master controller);
• TS: self-centering and lock-in at centre (zero) position;
• 2: 2 axis, cross limiting plate operation;
• L: switch assembled horizontal;
• 3(5): 3 steps each direction, (5): contact arrangement;
• HD39: grip with latch for mechanical zero interlock;
• M5: mounting dimension: 85x85mm, central hole: 78mm.

Genie GE-137634 Single-axis Joystick Controller for Traction

Genie part# GE-137634/JRG-1A12 fits to the following Genie models:
GR-12, GR-15, GR-20, GRC-12, GS-1530, GS-1532, GS-1930, GS-1932, GS-2032
GS-2046, GS-2632, GS-2646, GS-2646 AV, GS-2646 AV 35, GS-2669 DC, GS-3232, GS-3246
GS-3369 DC, GS-4047, GS-4069 DC, QS-12R, QS-12W, QS-15R, QS-15W, QS-20R, QS-20W

Genie GE-78903 Single-axis Joystick Controller for Traction, Direction and Elevation

p>
Genie part# GE-78903/JRG-1A05 (GE78903) fits to the following Genie models:
GR-12, GR-15, GR-20, GRC-12, GS-1530, GS-1532, GS-1930, GS-1932, GS-2032, GS-2046
GS-2632, GS-2646, GS-2668, DC, GS-2668 RT, GS-2669 RT, GS-3232, GS-3246, GS-3268 DC
GS-3268 RT, GS-3369 RT, GS-3384, GS-3384, GS-3390, GS-4069 RT, GS-4390, GS-5390

RunnTech Industrial Joystick with Centre-tap Potentiometer for Hoist & Winches

Product configuration: RT100-M-1-V1(10K)-02(89)-HD1-BT1R-M1

• RT100: RunnTech 100 series industry joystick controller;
• M: frictional movement to both direction from center;
• 1: single axis movement control;
• V1: input: DC24V, output: -10V…0…+10V;
• 10K: 10K ohm precision potentiometer;
• 02: 2 normally open contacts in each axis;
• 89: contacts @ -32° to -3° or +3° to +32°;
• BT1R: one red momentary thumb push button;
• M1: mounting dimension 56x56mm, central hole: 63mm.

RunnTech Develops New Joystick for JLG ES Scissor Lift- (JLG 1001134438)

After our technical team’s efforts, we are proud to announce the successful development of the new single axis drive steering joystick controller kits for JLG ES Scissor Lift (JLG Part no. 1001134438) fits Es Series, but not lmited to models such ss 1930Es, 2030Es, 2630Es and 3246Es. Also Was Used On Some Vertical Mast Lifts Like The 1230Es.

RunnTech Crane Joystick Controller with Friction Hold and 10K ohm Potentiometer

Product configuration: RT300-MS-2-L-P1(10K)-3(5)-HD39-M5

• RT300: RunnTech RT300 series crane joystick (master controller);
• MS: friction hold and self-lock operation;
• 2: 2 axis, cross direction;
• L: switch assembled horizontal;
• 6(1): 6 steps each direction, (1): contact arrangement;
• HD39: RunnTech joystick handle type;
• M5: mounting dimension: 85x85mm, central hole: 78mm.

RunnTech 2 Axis Spring Return Joystick with 10K Center Tapped Potentiometer

Product configuration: RT100-T-2-P1(10K)-02(89)-HD1-BT1R-M1

• RT100: RunnTech 100 series industry joystick controller;
• T: spring return to center when release operation;
• 2: dual axis, cross limiting plate operation;
• P1: simple 2 direction output with center tapped;
• 10K: 10K ohm precision potentiometer;
• 02: 2 normally open contacts in each axis;
• 89: contacts @ -32° to -3° or +3° to +32°;
• HD1-BT1R: HD1 grip with 1 red momentary thumb push button;
• M1: mounting dimension 56x56mm, central hole: 63mm.

RunnTech DC 24V Input, ±10V Analog Output with Mechanical Zero Interlock Joystick

Product configuration: RT200-TS-1-V1(10K)-02(89)-HD5-M1

• RT200: RunnTech 200 series single axis joystick controller;
• TS: spring return to center with mechanical zero interlock;
• V1: input: DC24V, output: -10V…0…+10V;
• 10K: 10K ohm precision potentiometer;
• 02: 2 normally open contacts in each axis;
• 89: contacts @ -32° to -3° or +3° to +32°;
• HD5: RunnTech joystick grip with mechanical zero interlock;
• M1: mounting dimension 56x56mm, central hole: 63mm.

RunnTech 2-axis, Friction-hold Joystick with 2 Momentary Thumb Push Buttons

Product configuration:RT01-M-2-P1(10K)-02(89)-HD10b2-BT2③R②G-M4

• RT01: RunnTech 01 series joystick controller;
• M: Friction hold operation;
• 2: dual axis joystick, cross direction movement;
• P1: simple 2 directions output;
• 10K: 10K ohm precision potentiometer;
• 02: 2 normally open contacts in each axis;
• 89: contacts @ -32° to -3° or +3° to +32°;
• H10b2: RunnTech joystick grip with deadman button;
• BT2③R②G: 2 self-resetting push button;
• M4: mounting dimension 64x64mm, central hole: 84mm;