Yearly Archives: 2020

RunnTech Single Axis 4mA…20mA Joystick with Spring Return to Neutral to Control VSD Speed

Product configuration: RT200-TS-I2(10K)-03(589)-HD5-M1

• RT200: RunnTech 200 series single-axis joystick controller;
• TS: self-centering with zero interlock (lift to release the grip);
• I2: input: 24Vdc, output: 20mA…4mA…20mA;
• 03: 3 normally open contacts in Y axis;
• 589: neutral, up and down contacts signal;
• HD5: joystick grip with zero interlock ((lift to release);
• M1: mounting dimension: 56x56mm, central hole: 63mm;

RunnTech 2 Axis Joystick Controller for Crane/Hoist Control with Center Tapped Potentiometer

Product configuration: RT300-TS-2-L-P1(10K)-4(2)-HD39-M5

• RT300: RunnTech RT300 series crane/hoist joystick (command controller);
• TS: spring return to center with zero interlock;
• 2: Y/X axis plus (+) direction movement;
• L: switch assembled horizontal;
• P1: input: 0…36Vdc, output: 0…36Vdc (0%…100%);
• 10K: 10K Ohm conductive-plastic potentiometer with solid center tap (with dead zone);
• 4(2): 4 steps each direction, (2): contacts arrangement;
• HD39: grip with mechanical zero interlock (lift to release the grip);
• M5: mounting dimension: 85x85mm, central hole: 78mm.

RunnTech Multi-Axis Joystick Control-handle with Knob Solid for Electro-hydraulic Applications

Product configuration: RT100-T-3-P1(10K)-02(89)-HD1-M2 (special wire drawing)

• RT100: RunnTech 100 series industrial joystick controller;
• T: Spring return in 0 position;
• 3: dual axis omnidirectional movement;
• P1: 0%…100%Vdc output;
• 10K: 10K ohm center tapped potentiometer;
• 02(89): 2 directional switches in each axis;
• HD1: grip handle without pushbutton;
• M2: mounting dimension: 85x85mm, central hole: 63mm.

RunnTech 3 (XYZ) Axis CANbus Industrial Joy Stick with On/off Buttons for Electric Boat Control

Product configuration: RT02-T-3-HV1-02(89)-HD10b7-BT2②③R-[W100L-HV1]-M6-CAN2.0

• RT02: RunnTech RT02 series heavy duty joystick controller;
• T: spring return to center (self-centering);
• 3: dual axis, omnidirectional movement;
• HV1: Hall effect technology;
• 02(89): 2 directional contacts in each axis;
• HD10b7-BT2②③R: grip with deadman trigger and 2 pushbuttons;
• W100L-HV1: proportional thumbwheel to achieve 3rd axis control;
• M6: mounting dimension: 76x76mm, central hole: 92mm;
• CAN2.0: CAN 2.0 communication protocol.

RunnTech Electronic Floor Pedal Analogue Throttle Pedal for WM526- 350827 Replacement

RunnTech 2 Axis Industrial Joystick 0…5Vdc Output for Controlling Overhead Bridge/Trolley Crane

Product configuration: RT100-T-3-V6(10K)-02(89)-HD4-M1

• RT100: RunnTech 100 series joystick controller;
• T: spring return to center operation;
• 3: dual axis, omnidirectional movement;
• V6: input: DC24V, output: 0…2.5…5Vdc;
• 10K: 10K ohm center tapped potentiometer;
• 02(89): 2 directional switches signals;
• HD4: grip top without momentary pushbutton;
• M1: mounting dimension: 56x56mm, central hole: 63mm.

RunnTech Single Axis Joystick with Industry Standard 4…12…20mA Output and Deadman Trigger

Part number: RT100-T-1-I1(10K)-02(89)-HD10a4-BT4②③R④⑤R-M7

• RT100: RunnTech 100 series multi-axis joystick controller;
• T: mechanical spring return to center position;
• 1:single axis (default Y axis) movement;
• I1: input 24Vdc, output: 4 wire 4mA…12mA…20mA (amperage output);
• 10K: 10K Ohm conductive-plastic potentiometer with solid center tap;
• 02(89): 2 directional switches signals in Y axis;
• HD10b4: grip backside with deadman trigger;
• BT4④⑤RD②③GN: 4 on/off momentary pushbuttons;
• M7: mounting dimension: 85x85mm, central hole: 80x80mm;

RunnTech Single-axis (forward/backward) Joystick with 4…20mA Output Top with 2 Pushbutton

Product configuration: RT100-T-1-I1(10K)-03(589)-HD80-BT2R-M1

• RT100: RunnTech 100 series industrial joystick;
• T: spring return to center;
• 1: single axis in Y direction only – forward/backward movement;
• I1: input DC 24V/12V, output: 4mA…12mA…20mA;
• 10K: 10K Ohm conductive-plastic potentiometer;
• 03(589): 1 center detecting switch and 2 directioanl switches in Y axis;
• HD80-BT2R: joystick grip top with 2 momentary pushbuttons;
• M1: mounting dimension 85x85mm, central hole: 63mm.

RunnTech Joysticks for Linde Forklift Truck with CE Approved and European RoHS 2.0 Compliant

We Are Proud to Announce that RunnTech Joystick has Successfully Entered Aerospace Industry

After several months testing, RunnTech RT100 series industrial joystick controller has successfully passed various rigorous tests by aerospace industry customer, marking an important breakthrough of our products application in the field of high reliability industry.

It is also understood that our products are used to control related equipment to refuel rocket boosters.