RunnTech Multifunction Control Handle (Tiller Head): H100-G-L-T
- H100: RunnTech H100 series tiller head;
- G: turtle speed button;
- L: horn button;
- T: speed controller (throttle);
RunnTech 2 Axis Cross Limiting Plate Spring Return 10K Potentiometer Joystick
Product configuration: RT100-T-2-P1(10K)-HD8-M1
- RT100: RunnTech RT100 series joystick controller;
- T: self-resetting spring return operation;
- 2: 2 axis, cross direction movement;
- P1: simple dual directions output;
- 10K: 10K potentiometer resistor;
- HD8: RunnTech joystick grip type;
- M1: mounting dimension.
RunnTech DC 24Vdc Multi-axis Industrial Joystick Potentiometer & Momentary Pushbutton
Product configuration: RT100-T-3-02(7)-HD4-BT1-M1
- RT100: RunnTech RT100 series joystick controller;
- T: spring return;
- 3: 2 axis, free movement;
- 02: 2 micro switch in each axis, total 4 micro switches;
- 7: switch closed position;
- HD4: RunnTech joystick grip type;
- BT1: 1 self-resetting button;
- M1: mounting dimension.
RunnTech RT300 Series 2 Axes Joystick Spring Return to Center for Winche & Crane
Product configuration: RT300-T-2-L-Y4(1)-X3(1)-HD39-M5
- RT300: RunnTech RT300 series crane joystick (master controller);
- T: Self-resetting operation;
- 2: 2 axis, cross direction;
- L: switch assembled horizontal;
- Y4(1): Y axis 4 steps each direction, (1): closed position;
- X3(1): X axis 3 steps each direction, (1): closed position;
- HD39: RunnTech joystick handle type;
- M5: mounting dimension
RunnTech Y Axes Friction Hold at Any Point 1K Ohm Potentiometer Joystick Controller
Product configuration: RT100-M-1-P2(1K)-01(05)-HD2-M1
- M: friction position;
- 1: single axis (y axis);
- P2: simple single direction;
- 1K: potentiometer resistor is 1K Ohm;;
- 01: 1 direction switch;
- 05: closed position;
- HD2: round ball shape joystick grip;
- M1: mounting dimension;
RunnTech Spring Return to Middle Position Hall Sensor Joy Stick for Mining Machinery
Product configuration: RT100-T-2-HV1(H)-02(89)-HD10b4-BT4(②③)R(④⑤)G-M7
- T: spring return to center;
- 2: 2 axis, cross direction.
- HV1: 0…2.5…5V output.
- 02: 2 normally open contacts in each axis;
- 89: contacts @ -32° to -3° or +3° to +32°;
- HD10b4: HD10 handle with deadman button;
- BT4(②③)R(④⑤)G: 4 self-resetting push buttons;
- M7: mounting dimension 85x85mm, central hole: 80x80mm.
Industrial joystick is mainly use for what?
In recent years, industrial joysticks has been widely used in many industrial and manufacturing industry, such as; cranes, assembly lines, forestry equipment, mining trucks and excavators. In fact, this can cope with high demand lever in nearly all modern hydraulic control system actually replaces the traditional mechanical lever. Since the industrial joystick is used frequently…